DuraTex Concrete Coatings is a professional concrete coating installer serving Denton and the surrounding North Texas area. Whether you’re finishing a garage, refreshing outdoor concrete around your home, or protecting a commercial or industrial space, we handle the whole project from surface preparation through final coat. No subcontracting and no shortcuts.
Polyurea and polyaspartic coatings are in the same family as epoxy, but they’re a better fit for concrete floors in most applications. What DuraTex installs is different: a polyurea base coat paired with a polyaspartic topcoat. That system is tougher under impact and abrasion, stays flexible as concrete shifts with temperature changes, and holds up to stains and chemical spills without absorbing them. It’s also UV-stable, so sun-exposed surfaces like patios, pool decks, and driveways won’t yellow or fade the way standard coatings can. Cure times are faster, too – most floors are back in service within a day.
Here in North Texas, floors take a beating – gritty soil tracked in from outside, intense UV through garage windows and on open slabs, and pool decks that stay wet half the year. The coating system matters, but so does how the floor is prepared before a drop goes down.
Every project starts with moisture testing, because coating over a damp slab causes failures regardless of what product you use. From there, we mechanically grind the surface to open the concrete and ensure a real mechanical bond – not just an adhesive one. Cracks, spalling, or low spots get addressed before coating, not after.
Color and finish options are practical and varied: chip blend palettes in a range of tones, matte or satin topcoat finishes, and broadcast textures for pool decks or wet-area floors where traction matters.
Contact DuraTex for a free, no-obligation estimate. Our coating system carries a manufacturer-backed limited lifetime warranty, and we’ll walk you through exactly what that covers before you commit to anything.
Let’s talk about your floor. We’ll inspect your space, recommend the best system, and give you a free quote.
We use industrial-grade diamond grinders to remove imperfections and prepare the surface for a strong bond.
We fill cracks and apply a pure polyurea basecoat that penetrates and bonds to the concrete for unmatched strength.
While the basecoat is still wet, we broadcast your chosen flake blend, then scrape and vacuum for a clean, even finish.
A UV-stable polyaspartic topcoat seals the floor for lasting protection. After curing, we inspect the floor to ensure everything is perfect.
Choosing the right concrete floor coating system is crucial, whether it’s your garage, a space around the home, or a commercial floor. The unique DuraTex Concrete Coatings process, from the quality of our product to the expertise of our team, guarantees superior, long-lasting results you can trust.
Our coating materials are manufactured in the USA by Penntek Industrial Coatings. The polyurea base is 99% pure, which is a big part of what gives the system its strength, flexibility, and long-term durability.
Our installers are trained and certified to follow the process, including moisture testing, mechanical grinding, and repair work when the slab needs it. That’s how you get proper adhesion and a clean finish.
DuraTex systems are backed by a manufacturer-backed limited lifetime warranty. We’ll walk you through what’s covered and what to expect based on the surface and how the space is used.
Spills? No sweat! Wipe away messes in seconds with our super slick coating.
Sun-proof and fade-resistant, our coating keeps its cool and color, no matter the weather.
It’s 98% more flexible than epoxy. Bend it, twist it — our coating bounces back!
Traditional epoxy coatings and lower-grade “polyaspartic” systems don’t compete with the performance of our coating system. Epoxy is prone to chipping and peeling on concrete floors over time, and it can fade or yellow with UV exposure. Our Penntek-manufactured polyurea is stronger, more flexible, and formulated to resist hot-tire pickup, staining, and UV-related discoloration.
We back this performance with a manufacturer-backed limited lifetime warranty. See how our coating stacks up to traditional epoxy and cheaper polyurea:
Our garage floor coating system uses polyurea and polyaspartic polyurea – the gold standard for industrial durability. Unlike standard epoxy and cheap polyurea, our 99% pure formula creates a bond that is four times stronger than traditional epoxy and guaranteed to never peel away from your concrete. This superior quality means your garage floor can easily handle heavy equipment and frequent use without chipping or wearing down. We install a surface that is built to last a lifetime.
Concrete naturally expands and contracts with changing temperatures, especially in here Texas. Traditional epoxy is rigid and brittle, which is why it often cracks and peels as the concrete moves. Our polyurea is up to 98% more flexible than epoxy and cheaper alternative polyureas. This means it can stretch and bend with the concrete fluctuations without breaking its bond. This flexibility is the key to a coating that remains seamless and beautiful year after year.
Many cheaper polyurea coatings, particularly traditional epoxy, are not UV stable. Over time, sunlight exposure causes them to fade, chalk, or develop an unsightly yellow tint. Our DuraTex polyurea is a high-performance, UV-stable formula. This means your garage floor’s color will remain vibrant and true, even with constant exposure to sunlight and heat. This quality is backed by our lifetime warranty against fading and yellowing.
The seamless, non-porous finish of our polyurea is chemically resistant to oil, gasoline, and harsh chemicals, making cleanup a breeze – spills simply wipe away. Even better, this non-porous surface is 100% antibacterial and antimicrobial, meaning it actively prevents the growth of mold, mildew, and bacteria. This ensures your garage or basement floor is always cleaner and safer for your family.
Learn more about our epoxy-like garage floor coating.
Yes. We install professional concrete coating systems in Denton, TX and nearby areas. That includes garage floors, patios, pool decks, walkways, and other concrete surfaces.
If your concrete needs repairs first, we can handle crack repair and surface prep work before the coating goes down.
Yes. We offer free, no-obligation on-site estimates in (City) and surrounding communities. We measure the space, check the slab condition, review finish options, and confirm what prep or repairs are needed.
We coat residential and commercial concrete floors. Here are just a few examples of types of concrete floors we coat:
Residential
Garage floors
Patios and pool decks
Driveways, porches, walkways, stairs (concrete & wood)
Basements and utility areas
Commercial
Shops and service bays
Warehouses and storage areas
Showrooms and work areas
Industrial facilities
Epoxy is an older coating chemistry that can be more vulnerable to peeling and UV discoloration depending on the environment and install variables. Polyurea systems are built for toughness and flexibility, and polyaspartic is commonly used as a UV-stable topcoat. Another big difference is cure time. Polyurea and polyaspartic systems typically cure much faster than traditional epoxy. In many cases, you can walk on it the same day and park on it within 24 to 48 hours, depending on conditions. Traditional epoxy often needs more time before it’s ready for heavier use. A common planning range is next-day foot traffic, then roughly 3 to 7 days before you can park vehicles, with full cure taking about a week, depending on the product and conditions.
On concrete floors, epoxy often starts showing wear sooner than most expect. In many cases, epoxy floors need repairs or a recoat within the 2 to 5 year range.
Some epoxy floors can last longer, but lifespan depends heavily on surface prep, moisture, and how much use the floor is exposed to.
With proper prep and normal maintenance, a high-performance polyurea plus polyaspartic system is built for long-term use, often 15 plus years.
DuraTex also backs the system with a manufacturer-backed limited lifetime warranty.
We start with moisture testing. If the slab has moisture issues, that has to be addressed before anything else.
Typical prep includes
Moisture testing and slab inspection
Mechanical grinding to remove contaminants and open the concrete for bonding
Crack repair and patching of spalls and pitting
Resurfacing or leveling work when needed to create a stable base
After prep and repairs, we install the coating system.
Yes. We repair cracks and damaged areas before coating so the slab is stable and the finished floor looks clean.
Repairs can still be faintly visible in certain lighting, but flake chip floor finishes help hide a lot.
Moisture is one of the fastest ways to cause coating problems. We moisture-test the slab and look for signs like dark spots, sweating, or previous coating failure.
If moisture is high, we’ll walk you through the options before moving forward. Depending on the readings and the slab condition, that may include additional prep steps, a moisture-mitigation primer or moisture-tolerant base coat, and in some cases changes to drainage or ventilation so the slab can dry out properly. If the numbers are too high for a reliable install, we’ll recommend the safest path instead of forcing a coating onto a slab that isn’t ready.
Yes, but not immediately. New concrete needs time to cure and dry, then it has to pass moisture testing before it’s a good candidate for coating.
Return-to-use timing depends on humidity and temperature, but here’s the typical planning range.
We’ll confirm timing for your project.
Penntek floors are easy to maintain.
Sweep off sand and salt, then rinse with water. A squeegee works great to clear water off.
Ask us about Penntek’s LGX-501 floor cleaner. It’s designed to work with Penntek coatings. Mix the concentrate with warm water.
If you prefer, you can use common cleaners per label directions. Penntek recommends Simple Green, Pine-Sol, CLR, and Dawn.
Avoid long-term bleach exposure and avoid acids or highly corrosive materials.
For tougher cleaning, let the cleaner sit 5 to 10 minutes, scrub with a scrub brush or stiff bristle broom, wait another five minutes, then rinse.
Most customers choose a flake chip floor finish for a clean look that hides minor imperfections better than a flat painted look.
We offer a range of flake blends and can recommend options that fit the space. If you have a specific look in mind, send us a photo or a quick description and we’ll help you narrow in on the best match and confirm what’s available.
Usually
Clear the area of vehicles, storage, and breakables
Provide access to the work area and a power source
Keep kids and pets out of the work zone during prep and install
If your space needs anything special, we’ll cover it during the estimate.
DuraTex Concrete Coatings proudly serves homeowners across the greater Fort Worth metroplex, including Tarrant and Parker Counties as well As Denton County. If you’re looking for a premium garage floor coating installer near you – you found the best.
Contact us today to confirm service in your town and get a free quote!
Fill out form below to request a free quote for your concrete floors.
By submitting this form, you agree to our Privacy Policy. You consent to receive phone calls and SMS messages from DuraTex Concrete Coatings to provide updates on your order and inquiries. Message frequency depends on your activity. You may opt-out by texting “STOP”. Reply HELP for more information. Message and data rates may apply.
